Brachychiton populneus x acerifolius 'Jerilderie Red' - Evergreen Trees Direct

Brachychiton populneus x acerifolius 'Jerilderie Red'

$400.00

Tax included. Shipping calculated at checkout.

Size: 40cm/45L

40cm/45L 50cm 100L

Current Stock Height Guides

40cm/45L: 0.8m - 1.2m Approx.
50cm: 1.6–1.8m Approx.
100L: 2.1m - 2.9m Approx.

Height guide disclaimer: Height ranges are approximate only. As living products, plant heights naturally vary between individual plants, batches, and seasons. No guarantee is given that supplied plants will fall within the stated range. If minimum heights are required, you mustconfirm current batch heights with Evergreen Trees Direct prior to purchase. Variation in height is normal and is not grounds for return, refund, replacement, or compensation.

Mature Height & Width

Mature Height: 8m to 12m (approx.)

Mature Width: 4m to 6m

Brachychiton populneus x acerifolius 'Jerilderie Red' is expected to grow 50cm to 80cm per year (approx.).

Root Ball Dimensions

Use this as a reference when digging your planting hole. We recommend digging at least 10% wider than the dimensions below to encourage strong root development.

30cm Pot: 33cm (W) × 30cm (D)
40cm/45L Pot: 44cm (W) × 41.5cm (D)
50cm Pot / 70L Pot: 55cm (W) × 41.8cm (D)
100L Bag: 50.6cm (W) × 52.8cm (D)
150L Bag: 66cm (W) × 55cm (D)
200L Bag: 71.5cm (W) × 60.5cm (D)
300L Bag: 88cm (W) × 63.8cm (D)
400L Bag: 99cm (W) × 66cm (D)
500L Bag: 122cm (W) × 66cm (D)
750L Bag: 134cm (W) × 69cm (D)
1000L Bag: 146.3cm (W) × 71.5cm (D)
2000L Bag: 176cm (W) × 82.5cm (D)

Trade

We supply advanced trees to landscapers, developers, architects, and councils Australia-wide. Trade clients receive fast quotes, expert advice, and access to premium stock with reliable freight.

Register or learn more ›

Shipping

Shipping is calculated at checkout based on the pallet space your order occupies in the truck and your delivery location.

There is no charge to calculate your freight.

Contact

Have a question or a list to send through to us?

Email: sales@evergreentrees.com.au

Phone: (03) 7042 3318

About Your New Brachychiton populneus x acerifolius 'Jerilderie Red'

Brachychiton populneus x acerifolius 'Jerilderie Red' is a native hybrid with an upright habit, a straight sturdy trunk and glossy green lobed foliage. Deep red bell shaped flowers open from late spring into early summer and sit against the leaves rather than on bare wood, which gives the display strong contrast.

Full sun suits it best, and it grows in most free draining soils from sand through to heavy loam. Established trees are strongly drought tolerant and take light to moderate frost, making it a sound choice for inland and western districts. Expect around 50 to 80 centimetres of height a year.

The tidy footprint works for driveway rows, entry statements and streetscapes where a red flowering feature is wanted without a wide canopy. It also stands well on its own against gravel, stone or rendered walls. Dependable colour on a tree that asks for very little water is the main drawcard.

Frequently Asked Questions

About Jerilderie Red Brachychiton

What is Brachychiton 'Jerilderie Red'?

It is a selected hybrid between the Kurrajong and the Illawarra Flame Tree, grown for deep red bell flowers on a resilient, upright frame. The cross brings together the dry country hardiness of one parent and the flowering power of the other. It is an Australian native cultivar suited to feature and street planting.

How big does Jerilderie Red grow?

In most gardens it makes 6 to 10 metres tall with a canopy of 3 to 5 metres, holding an upright form with a defined central trunk. That keeps it well below the mature size of a straight Illawarra Flame Tree. Growth slows once the canopy is formed, so the mature footprint stays predictable.

What colour are the flowers?

The flowers are a deep red, which is what separates this selection from the pink flowered hybrids in the same group. They are bell shaped, around two to three centimetres long, and are carried in clusters along the branches from late spring into early summer. The colour reads strongly against the glossy green foliage.

Is it drought tolerant?

Yes, very. Once the root system is established it will carry through long dry summers on rainfall alone in most inland districts, which is why it is used on rural properties and low water streetscapes. Regular deep watering is still needed through the first two summers while the roots reach down into the profile.

Is it suitable for street or median planting?

It is well suited to it. The upright habit, single trunk and moderate canopy width keep it clear of traffic and buildings, and the root system is not regarded as aggressive. Plant at about 3 metres apart for a uniform avenue, or 3 to 4 metres where each tree should stand as an individual.

Is it evergreen?

It holds its foliage year round in most Australian gardens, unlike the Illawarra Flame Tree parent which sheds its leaves before flowering. In a cold winter or a hard dry spell it may thin out briefly, then refoliate quickly in spring. In practice it reads as an evergreen tree in the landscape.

How do I care for Jerilderie Red?

Water deeply and regularly for the first two summers, then only through prolonged dry weather. Mulch the root zone and keep it clear of the trunk. Prune in late winter to remove damaged wood or to raise the canopy over paths and driveways. Use a low phosphorus native fertiliser in early spring if growth seems slow.

Enriched Planting Mix (AO Certified)

$21.95

Enriched Planting Mix is a certified organic blend of Pure Magic Compost, composted animal manure, gypsum, composted coarse bark and a wetting agent, bagged in 30L. It is built to be dug through existing garden soil at planting time rather than used on its own, and the gypsum is what sets it apart from a plain compost.

Gypsum helps break up heavy clay so water and roots can move through it, while the compost and manure return organic matter and nutrient to tired ground. The coarse bark holds structure and keeps air around the root zone, and the wetting agent keeps moisture in the soil longer after rain or watering.

Use it when planting trees, shrubs, roses, fruit trees and exotic garden plants, particularly into clay. Dig a hole twice the width of the pot and 7 centimetres deeper, then mix roughly one third planting mix through the excavated soil. Spread 7 centimetres of that improved soil in the base before setting the plant in.

Frequently Asked Questions

About Enriched Planting Mix

What is Enriched Planting Mix made from?

It is a blend of Pure Magic Compost, composted animal manure, gypsum, composted coarse bark and a wetting agent. Each part has a job. The compost and manure supply organic matter and nutrient, the gypsum works on clay structure, the bark keeps air around the roots and the wetting agent holds moisture in the soil.

What plants is it suitable for?

It suits exotic garden plants, including roses, ornamental and deciduous trees, fruit trees, shrubs and perennials, and it earns its keep most on heavy clay sites. It is a planting mix rather than a potting mix, so its job is improving soil at planting time. Phosphorus sensitive natives are the one clear exception.

Is it safe for natives?

No, not for the phosphorus sensitive ones. The composted animal manure in this blend lifts phosphorus well above what Proteaceae such as Banksia, Grevillea, Hakea and Protea will tolerate, and the result can be leaf burn, dieback and plant death. Use the Native Potting Mix for those species, or plant them into unimproved local soil.

Is it certified organic?

Yes. It is a certified organic product with no chemical additives, which is why the manure and compost in it are fully composted rather than raw. That makes it sound around fruit trees and vegetable beds, and it means you are adding genuine organic matter to your soil rather than a synthetic conditioner.

How much do I need?

Work on roughly one third planting mix to two thirds of the soil you dug out of the hole. For a shrub out of a 200 millimetre pot that is only a few litres. An advanced tree going into a large hole will take considerably more. Judge the quantity by the volume of the hole rather than the size of the plant.

Can I use it in pots?

It is not a potting mix and should not be used on its own in a container. The blend is designed to be diluted through garden soil, and used straight in a pot it holds too much water and settles badly. For containers, reach for a premium potting mix, or the native mix if you are potting natives.

Does it need to be watered in?

Yes. Water the plant well several hours before you plant it, then water thoroughly again once the hole is backfilled and the soil firmed down. That first deep watering settles the improved soil around the root ball and drives out air pockets. Keep the water up over the first few months while the roots establish.

View full details

Type: Garden Supplies

Enriched Planting Mix (AO Certified)

$21.95

Type: Hedging and Screening Trees

Acmena smithii 'Sublime' Lilly Pilly

From $150.00

Type: Hedging and Screening Trees

Rhaphiolepis indica 'Oriental Pearl'

From $40.00

Type: Hedging and Screening Trees

Rhaphiolepis indica 'Snow Maiden'

From $40.00

Liguleria Reniformis - Evergreen Trees Direct

Type: Structural Foliage

Ligularia reniformis

$45.00

Type: Structural Foliage

Buxus japonica Japanese Box Topiary Balls

From $300.00

Type: Structural Foliage

Buxus sempervirens English Box Topiary Balls

From $200.00

Uses in my Garden

Feature Tree
Shade Tree
Rural Property Planting
Avenue Planting
Council or Civic Landscapes
Street Tree

Brachychiton populneus x acerifolius 'Jerilderie Red' works in an:

Australian Native Garden – celebrates local plants with natural character.
Modern Garden – sleek, minimal, and design-led planting.
Coastal Garden – relaxed, seaside feel with hardy, textural plants.
Low-maintenance Garden – resilient choices for easy care and year-round appeal.

Is Brachychiton populneus x acerifolius 'Jerilderie Red' Evergreen or Deciduous?

Brachychiton populneus x acerifolius 'Jerilderie Red' is an Evergreen (foliage year round) Tree

Mature Height & Width

Mature Height: 8m to 12m (approx.)

Mature Width: 4m to 6m

Brachychiton populneus x acerifolius 'Jerilderie Red' is expected to grow 50cm to 80cm per year (approx.).

Growth Rate of Brachychiton populneus x acerifolius 'Jerilderie Red'

Brachychiton populneus x acerifolius 'Jerilderie Red' is expected to grow 50cm to 80cm per year (approx.).

They are considered to have a:

Fast Growth Rate

Frost Tolerance & Ideal Climate to plant Brachychiton populneus x acerifolius 'Jerilderie Red'

Is Brachychiton populneus x acerifolius 'Jerilderie Red' frost tolerant?

Brachychiton populneus x acerifolius 'Jerilderie Red' is Frost Tolerant – Can handle light to moderate frost once established.

Does Brachychiton populneus x acerifolius 'Jerilderie Red' Flower?

Brachychiton ‘Jerilderie Red’ produces masses of vivid scarlet bell-shaped flowers from late spring into summer. The brilliant red blooms cluster along the branches, creating a bold, high-impact seasonal display reminiscent of its Illawarra Flame Tree parentage.

Does Brachychiton populneus x acerifolius 'Jerilderie Red' flower?

Yes - Flowers

Flowering Period:

Spring
Summer

Flower Type:

Bell-shaped

Flower Colour:

Red

Is Brachychiton populneus x acerifolius 'Jerilderie Red' an Australian Native Tree?

Yes

Brachychiton populneus x acerifolius 'Jerilderie Red' is Native to A hybrid between Brachychiton populneus (Kurrajong) and Brachychiton acerifolius (Illawarra Flame Tree), both native to eastern Australia. ‘Jerilderie Red’ was bred for stronger colour and adaptability.

What is the Wildlife Value of Brachychiton populneus x acerifolius 'Jerilderie Red' ?

Its nectar-rich flowers attract honeyeaters, lorikeets, butterflies and native bees, while the canopy provides shelter for small birds. The seed pods support insects and seed-eating wildlife, helping to build a diverse and resilient garden ecosystem.

How much Sunlight does Brachychiton populneus x acerifolius 'Jerilderie Red' need?

Brachychiton populneus x acerifolius 'Jerilderie Red' will thrive best in:

Full Sun

Preferred Soil?

Brachychiton ‘Jerilderie Red’ performs best in well-drained sandy or loam soils and tolerates slightly acidic to slightly alkaline conditions. It may struggle in heavy clay or poorly drained areas unless improved with organic matter and coarse material to boost drainage. Keep soil evenly moist during establishment, then shift to deep, occasional watering as the tree matures and develops its hallmark high drought resilience.

Is Brachychiton populneus x acerifolius 'Jerilderie Red' Drought Tolerant?

Is Brachychiton populneus x acerifolius 'Jerilderie Red' Drought tolerant?

As a young tree it benefits from regular watering, but once established Brachychiton ‘Jerilderie Red’ develops excellent drought tolerance. It thrives in hot, dry environments and maintains strong structure and flowering performance with minimal supplementary watering.

youtube

How To Plant Your Brachychiton populneus x acerifolius 'Jerilderie Red'

Site: Choose a well-drained position in full sun to part shade with room for the canopy to develop.

Soil preparation: Enrich the planting area with quality compost and aged manure for a strong establishment phase.

Hole: Dig twice as wide as the root ball and the same depth.

Planting: Position level with the surrounding soil, backfill gently, firm in, then water deeply to settle the roots.

Recommended Planting Spacing For Your Brachychiton populneus x acerifolius 'Jerilderie Red'

Feature tree: 3 to 4 metres apart to allow the full canopy and form to develop.

Avenue planting: 3 metres apart for a uniform soft-textured avenue.

Brachychiton populneus x acerifolius 'Jerilderie Red' is expected to grow 50cm to 80cm per year (approx.).

Fast Growth Rate

Long Term Care For Your Brachychiton populneus x acerifolius 'Jerilderie Red'

Watering: Water deeply twice weekly through the first 12 months. Once established, reduce to once weekly in dry periods. Mulch helps maintain consistent moisture.

Mulching: Apply a 5 to 7 centimetre layer of organic mulch over the root zone, keeping it 5 centimetres clear of the trunk.

Pruning: Minimal pruning required. Light tip prune in late winter to maintain shape, and remove lower branches as the tree grows to develop a clean feature trunk.

Fertilising: Apply a slow-release native blend in early spring and again in autumn. Avoid high-phosphorus formulations as a precaution.

Pest and disease: Hardy against most pests and diseases. Occasional scale or caterpillar inspection in warm humid conditions is all that's needed.

Planting Your Brachychiton populneus x acerifolius 'Jerilderie Red' in Different Soil

Brachychiton populneus performs best in well-drained sandy loam or loam with a slightly acidic to neutral pH. Adaptable to a wide range of soils when drainage is improved with organic matter.

Sandy soil: Free-draining and ideal. Mulch well to maintain consistent moisture.

Clay soil: Improve drainage with gypsum and organic compost before planting.

Loam: The preferred soil for steady root development and consistent growth.

pH: Slightly acidic to neutral preferred. Mulch with composted leaf litter to maintain levels naturally.

Frequently Asked Questions

Frequently Asked Questions

How does the 'Jerilderie Red' flower hue compare with other hybrids? It presents a richer, deeper red compared to most other Brachychiton varieties.
Is this tree suitable for small gardens? Given its upright growth, it can fit well in medium to large spaces.
How does it manage in warm climates? It's highly drought-resistant, perfect for hot areas, though regular watering during extended dry spells is advised.